Aluminium Alloy Plates

Chemistry Data:

• Aluminum: Balance
• Chromium: 0.05–0.25
• Copper: 0.1 max.
• Iron: 0.4 max.
• Magnesium: 4–4.9
• Manganese: 0.4–1
• Remainder Each: 0.05 max.
• Remainder Total: 0.15 max.
• Silicon: 0.4 max.
• Titanium: 0.15 max.
• Zinc: 0.25 max.

Mechanical Data :

• Form : Sheet
• Condition : H116
• Temperature : 68
• Tensile Strength : 42
• Yield Strength : 30
• Elongation : 12

Principal Design Features:

• This is a non-heat treatable alloy for strengthening. It has very good corrosion resistance, is easily welded and does have good strength.

Applications:

• Commonly used in the manufacture of unfired, welded pressure vessels, marine, auto aircraft cryogenics, drilling rigs, TV towers, transportation equipment, and in missile components.

Aluminium Alloy Plates 6082(T651) is manufactured under the following sizes and specifications. Also the material shall be supplied correctly as per your required size and specification, your detailed technical data/drawing for those items with valued enquires.

Available Sizes:

• Alloy 6082 is available from 6mm to 200mm.

Characteristics:

• Aluminium alloy 6082 is a medium strength alloy with excellent corrosion resistance. It has the highest strength of the 6000 series alloys. Alloy 6082 is known as a structural alloy. In plate form, Aluminium alloy 6082 is the alloy most commonly used for machining. As a relatively new alloy, the higher strength of Aluminium alloy 6082 has seen it replace 6061 in many applications. The addition of a large amount of manganese controls the grain structure which in turn results in a stronger alloy. In the T6 and T651 temper, Aluminium alloy 6082 machines well and produce tight coils of swarf when chip breakers are used.

Typical Applications:

• Aluminium alloy 6082 is typically used in High stress applications, Trusses, Bridges, Cranes, Transport applications, Ore skips, Beer barrels and Milk churns.

Aluminium Alloy Plates 6082(T651) is manufactured under the following sizes and specifications. Also the material shall be supplied correctly as per your required size and specification, your detailed technical data/drawing for those items with valued enquires.

Available Sizes
Alloy 6082 is available from 6mm to 200mm.

Characteristics
Aluminium alloy 6082 is a medium strength alloy with excellent corrosion resistance. It has the highest strength of the 6000 series alloys. Alloy 6082 is known as a structural alloy. In plate form, Aluminium alloy 6082 is the alloy most commonly used for machining. As a relatively new alloy, the higher strength of Aluminium alloy 6082 has seen it replace 6061 in many applications. The addition of a large amount of manganese controls the grain structure which in turn results in a stronger alloy. In the T6 and T651 temper, Aluminium alloy 6082 machines well and produce tight coils of swarf when chip breakers are used.
Typical Applications
Aluminium alloy 6082 is typically used in High stress applications, Trusses, Bridges, Cranes, Transport applications, Ore skips,barrels and Milk churns.

2024 Aluminum Alloy Plate This is the most common of the high-strength alloys. Aircraft quality, Aluminium Alloy Plate 2024 is thought of as the aircraft alloy because of its strength. It has excellent fatigue resistance. Welding is generally not recommended. Typical uses for 2024-T3 alclad Aluminium Alloy Plate are aircraft skins, cowls, aircraft structures, and also for RV repair and restoration like Airstreams because of it's shiny finish (2024T3 alclad)

Chemistry Data:

• Aluminum: Balance
• Chromium: 0.05–0.25
• Copper: 0.1 max.
• Iron: 0.4 max.
• Magnesium: 4–4.9
• Manganese: 0.4–1
• Remainder Each: 0.05 max.
• Remainder Total: 0.15 max.
• Silicon: 0.4 max.
• Titanium: 0.15 max.
• Zinc: 0.25 max.

Mechanical Data :

• Form : Sheet
• Condition : H116
• Temperature : 68
• Tensile Strength : 42
• Yield Strength : 30
• Elongation : 12

Principal Design Features

• This is a non-heat treatable alloy for strengthening. It has very good corrosion resistance, is easily welded and does have good strength.

Applications

• Commonly used in the manufacture of unfired, welded pressure vessels, marine, auto aircraft cryogenics, drilling rigs, TV towers, transportation equipment, and in missile components.

Aluminium Alloy Plates 1050 '0' (Soft) is a popular grade of aluminium for general sheet metal work where moderate strength is required. Aluminium Alloy Plates 1050 '0' (Soft) is known for its excellent corrosion resistance, high ductility and highly reflective finish.

Applications: - Aluminium Alloy Plates 1050 '0' (Soft) is typically used for:

Chemical process plant equipment

• Food industry containers
• Pyrotechnic powder
• Architectural flashings
• Lamp reflectors
• Cable sheathing

Alloy Designations:

• Aluminium Alloy Plates 1050 '0' (Soft) also corresponds to the following standard designations and specifications.

Aluminium alloy 5251 is a medium strength alloy possessing good ductility and therefore good formability. Alloy 5251 is known for work hardening rapidly and is readily weldable. It also possesses high corrosion resistance particularly in marine environments.

Applications
5251 is typically used in:

• Boats
• Panelling and pressings
• Marine structures
• Aircraft parts
• Vehicle panels
• Furniture tubing
• Silos
• Containers

Mechanical Properties shown are for H24 condition - Mechanical properties for other tempers are shown on page 2.

Alloy Designations:

• Alloy 5251 also confirms to:
• Al Mg2
• Al 2.0Mg 0.3Mn

Temper Types:
The most common tempers for 5252 aluminium are:

• H24 - Work hardened by rolling then annealed to half hard
• H26 - Work hardened by rolling then annealed to three-quarter hard
• O - Soft
• H22 - Work hardened by rolling then annealed to quarter hard.

Aluminium Alloy Plate 2024 This is the most common of the high-strength alloys. Aircraft quality, Aluminium Alloy Plate 2024 is thought of as the aircraft alloy because of its strength. It has excellent fatigue resistance. Welding is generally not recommended. Typical uses for 2024-T3 alclad Aluminium Alloy Plate are aircraft skins, cowls, aircraft structures, and also for RV repair and restoration like Airstreams because of it's shiny finish (2024T3 alclad)

Aluminium Alloy Plates 6061 is available to the client in good quality and at reasonable market price.

Available Sizes
Aluminium Alloy Plates 6061 is available in 6mm to 200 mm.

Characteristics
Aluminium Alloy Plates is a heat-treatable grade widely used in structural applications. The alloy has good corrosion resistance and welds ability and possesses good formability in certain Tempers.

Typical Applications
Aluminium Alloy Plates 6061 is used in structural areas where both strength and corrosion resistance is required, truck bodies and frames, and towers.

We are involved in offering a wide range of all products to our most valued clients.Our range of all products is widely appreciated by our clients which are situated all round the nation.We offer our range of products at most affordable prices. Also availaible in large quantity as per customer demand.

Applications:
Alloy 5083 is typically used in:

• Shipbuilding
• Rail cars
• Vehicle bodies
• Tip truck bodies
• Mine skips and cages
• Pressure vessels

Table 1. Typical chemical composition for aluminium alloy 5083
Properties of Aluminium Alloy 5083 Mechanical Properties of Aluminium Alloy 5083 Table 2. Typical mechanical properties for aluminium alloy 5083

Aluminium Alloy Plates 6061 is available to the client in good quality and at reasonable market price.

Available Sizes

• Aluminium Alloy Plates 6061 is available in 6mm to 200 mm.

Characteristics:

• Aluminium Alloy Plates is a heat-treatable grade widely used in structural applications. The alloy has good corrosion resistance and welds ability and possesses good formability in certain Tempers.

Typical Applications:

• Aluminium Alloy Plates 6061 is used in structural areas where both strength and corrosion resistance is required, truck bodies and frames, and towers.

Aluminium Alloy Sheet 5052 is made to internationally recognized standards such as AA, EN and JIS and is made available to the client at reasonable market price.

Available Sizes:

• Aluminium Alloy Plates 5052 is available from 10mm to 200mm or available size

Characteristics:

• Aluminium Alloy Plates 5052 is one of the higher strength non-heat-treatable alloys. It has a high fatigue strength and excellent corrosion resistance, particularly in marine atmospheres. The formability of the grade is excellent and in the annealed condition it offers higher strengths than 1100 or 3003 grades. One of the most popular alloys.

Typical Applications:

• Aluminium Alloy Plates 5052 is often used in high strength sheet metal work, marine components, appliances, fuel and oil tubing, signs, trucks bodies and electrical cabinets.