Welcome Overseas

• Aluminum: Balance
• Chromium: 0.05–0.25
• Copper: 0.1 max.
• Iron: 0.4 max.
• Magnesium: 4–4.9
• Manganese: 0.4–1
• Remainder Each: 0.05 max.
• Remainder Total: 0.15 max.
• Silicon: 0.4 max.
• Titanium: 0.15 max.
• Zinc: 0.25 max.

• Form : Sheet
• Condition : H116
• Temperature : 68
• Tensile Strength : 42
• Yield Strength : 30
• Elongation : 12

• This is a non-heat treatable alloy for strengthening. It has very good corrosion resistance, is easily welded and does have good strength.

• Commonly used in the manufacture of unfired, welded pressure vessels, marine, auto aircraft cryogenics, drilling rigs, TV towers, transportation equipment, and in missile components.

• Moisture resistant
• Light weight
• Sturdiness
• Compact designing
• Corrosion resistant
• High tensile strength

• Round
• Square
• Hex (A/F)
• Bush
• Rectangle
• Flat

Here are detailed descriptions for Aluminum Checkered Sheets:

Product Overview

Aluminum Checkered Sheets are durable, corrosion-resistant, and lightweight materials featuring a textured surface for improved traction and slip resistance.

Key Features

- Material: Aluminum Alloy (AA1100, AA3003, AA5052, AA6061)

- Thickness: 0.5mm to 10mm (0.02" to 0.39")

- Width: 1000mm to 2500mm (39.4" to 98.4")

- Length: 2000mm to 12000mm (78.7" to 472.4")

- Pattern: Diamond, Square, or Custom

- Certification: ASTM B209, ISO 9001

Specifications

- Yield Strength: 50-200 MPa (7-29 ksi)

- Ultimate Tensile Strength: 100-300 MPa (15-44 ksi)

- Elongation at Break: 10-20%

- Hardness: HB 40-80

- Corrosion Resistance: Excellent resistance to atmospheric corrosion

Applications

- Transportation (automotive, aerospace, marine)

- Construction (building facades, roofing)

- Industrial (machinery, equipment)

- Commercial (trailers, containers)

- Decorative (architectural features)

Benefits

- Lightweight and durable

- Corrosion-resistant

- Improved traction and slip resistance

- Easy to fabricate and install

- Cost-effective

Types of Aluminum Checkered Sheets

- Diamond Pattern

- Square Pattern

- Custom Patterns (e.g., hexagonal, circular)

Aluminum Alloys

- AA1100 (Commercial Pure Aluminum)

- AA3003 (Manganese Aluminum Alloy)

- AA5052 (Magnesium Aluminum Alloy)

- AA6061 (Magnesium-Silicon Aluminum Alloy)

Finishes

- Mill Finish

- Anodized

- Powder Coated

- Polished

Certifications and Compliance

- ASTM B209

- ISO 9001

- Other relevant certifications available upon request

E-commerce Product Description

"Aluminum Checkered Sheets

Product Details:

- Material: [Selected Material]

- Thickness: [Selected Thickness]

- Width: [Selected Width]

- Length: [Selected Length]

- Pattern: [Selected Pattern]

- Price: [Price]

Order now and get [insert benefits, e.g., free shipping, bulk discounts]"

Technical Datasheet

"Aluminum Checkered Sheets

Technical Specifications:

- Material: [Table with material data]

- Dimensions: [Table with dimensions]

- Mechanical Properties: [Table with data]

- Certification: [List relevant certifications]"

Dimensions

- Thickness: 0.5mm to 10mm (0.02" to 0.39")

- Width: 1000mm to 2500mm (39.4" to 98.4")

- Length: 2000mm to 12000mm (78.7" to 472.4")

Packing and Delivery

- Packed in bundles or rolls

- Delivered within 7-10 working days

- Custom delivery options available

• Moisture resistant
• Light weight
• Sturdiness
• Compact designing
• Corrosion resistant
• High tensile strength.

Aluminium Alloy Specialist - ●  Importer ● Exporter ● WholesalersMaterial Tailored To your specificationASTM, AMS-QQ-A, AMS, EN, GOST(Russian), IS StandardIn Grade of:-AA1100, 1200, 2007, 2011, 2014, 2017, 2024, 2124, 3003, 3105, 5005, 5052, 5056, 5083, 5086, 5251, 5754, 6012, 6026, 6060, 6061, 6063, 6082, 6262, 6351, 7020,7050, 7070, 7075, ALUMAC, ALUMOLD, MIC-6, RDE-40In Form of:-● Aluminium Sheets, Plates & Coils ● Aluminium Alloy Extrusions & Drawns ● Aluminium Alloy Forgings● Please feel free to contact us, so that we can prove our performance. We are confident that we will meet your requirements to your utmost satisfaction. We would appreciate if WELCOME OVERSEAS is enlisted on your record as one of your valued suppliers.  It will be a great pleasure to have an everlasting and fruitful business relationship with you.

• Aluminum: Balance
• Chromium: 0.05–0.25
• Copper: 0.1 max.
• Iron: 0.4 max.
• Magnesium: 4–4.9
• Manganese: 0.4–1
• Remainder Each: 0.05 max.
• Remainder Total: 0.15 max.
• Silicon: 0.4 max.
• Titanium: 0.15 max.
• Zinc: 0.25 max.

• Form : Sheet
• Condition : H116
• Temperature : 68
• Tensile Strength : 42
• Yield Strength : 30
• Elongation : 12

• This is a non-heat treatable alloy for strengthening. It has very good corrosion resistance, is easily welded and does have good strength.

• Commonly used in the manufacture of unfired, welded pressure vessels, marine, auto aircraft cryogenics, drilling rigs, TV towers, transportation equipment, and in missile components.

• T6 - Solution heat treated and artificially aged
• T3 - Solution heat treated, cold worked and naturally aged
• T6511 - Solution heat treated and stress-relieved by stretching then artificially aged with minor straightening after aging - Equivalent to T4 condition

• Bar
• Plate

• Alloy 2024 plate products are used in fuselage structurals, wing tension members, shear webs and ribs and structural areas where stiffness, fatigue performance and good strength are required. Sheet products, usually alclad, are used extensively in commercial and military aircraft for fuselage skins, wing skins and engine areas where elevated temperatures to 250°F (121°C) are often encountered.

• Si . . . 0.50
• Fe. . . 0.50
• Cu . . 3.8-4.9
• Mn . . 0.30-0.9
• Mg . . 1.2-1.8
• Cr. . . 0.10
• Zn . . 0.25
• Ti . . . 0.15

• Boats
• Panelling and pressings
• Marine structures
• Aircraft parts
• Vehicle panels
• Furniture tubing
• Silos
• Containers

• H24 - Work hardened by rolling then annealed to half hard
• H26 - Work hardened by rolling then annealed to three-quarter hard
• O - Soft
• H22 - Work hardened by rolling then annealed to quarter hard

• Plate
• Sheet

• Require a weldable alloy of high to moderate strength, with good corrosion resistance. Marine applications, unfired welded pressure vessels, TV towers, drilling rigs, transportation equipment, armour plate.

• Aluminum 5083 is a strong magnesium-manganese-chromium-Aluminum alloy. It can be hardened by cold work, but is not heat treatable to higher strength. It has good ductility for the strength level, better than most other 5000 series alloys (see figure).

• Alloy 5083 has excellent resistance to general corrosion, and is used in marine applications. Resistance is excellent in aqueous solutions in the pH range 4 – 9. The corrosion resistance of Aluminum alloys relies on a protective surface oxide film, which when damaged is readily repaired by the rapid reaction between Aluminum and oxygen. However, the high reactivity of the base metal can give rapid corrosion if the film cannot be repaired, so Aluminum alloys are not suitable for use with reducing media. Alloy 5083 can be anodised to improve the corrosion resistance by thickening the protective surface film. Alloy 5083 can be susceptible to exfoliation corrosion in severe applications. Material in the H116 temper is least susceptible, and passes the ASTM G66 Exfoliation Susceptibility Test (ASSET Test). AS 1734 suggests alloy 5083 should not be used above 65°C.

• AS1210 Pressure Vessels pre-qualifies alloy 5083 for pressure service for temperatures up to 65°C in the O, H112 & H321 tempers.

• Chemical process plant equipment
• Food industry containers
• Pyrotechnic powder
• Architectural flashings
• Lamp reflectors
• Cable sheathing

• Aluminium alloy 1050 also corresponds to the following

• AA1050A
• S1B
• A91050

• O - Soft

• Plain sheet
  Plain sheet with a PVC coating on one side
  Stucco sheet
  Stucco sheet with a PVC coating on one side
  Shate

• Sheet

• Shipbuilding
• Rail cars
• Vehicle bodies
• Tip truck bodies
• Mine skips and cages
• Pressure vessels

• O - Soft
• H111 - Some work hardening imparted by shaping processes but less than required for H11 temper
• H32 - Work hardened by rolling then stabilised by low-temperature heat treatment to quarter hard

• Plate
• Sheet

Aluminium Alloy Plates 6082(T651) is manufactured under the following sizes and specifications. Also the material shall be supplied correctly as per your required size and specification, your detailed technical data/drawing for those items with valued enquires.

Available Sizes:

• Alloy 6082 is available from 6mm to 200mm.

Characteristics:

• Aluminium alloy 6082 is a medium strength alloy with excellent corrosion resistance. It has the highest strength of the 6000 series alloys. Alloy 6082 is known as a structural alloy. In plate form, Aluminium alloy 6082 is the alloy most commonly used for machining. As a relatively new alloy, the higher strength of Aluminium alloy 6082 has seen it replace 6061 in many applications. The addition of a large amount of manganese controls the grain structure which in turn results in a stronger alloy. In the T6 and T651 temper, Aluminium alloy 6082 machines well and produce tight coils of swarf when chip breakers are used.

Typical Applications:

• Aluminium alloy 6082 is typically used in High stress applications, Trusses, Bridges, Cranes, Transport applications, Ore skips, Beer barrels and Milk churns.

• Aluminum Alloy Rods Grades 6061 T6 .
• Aluminum Alloy Rods Grades 2024 T3 .
• Aluminum Alloy Rods Grades 7075 T6 .
• Aluminum Alloy Rods Grades 2011 T3 .
• Aluminum Alloy Rods Grades 5086 .
• Aluminum Alloy Rods Grades 6082 .
• Aluminum Alloy Rods Grades 5251 .
• Aluminum Alloy Rods Grades 1050 .
• Aluminum Alloy Rods Grades 2014 .

WELCOME OVERSEASis committed to achieve excellence in all spheres of business activities. Welcome overseas is always keen to understand the specific needs of the customers to serve them with excellence. Our main aim is to provide better quality, competitive price and excellent service to our customers. 

Aluminium Alloy Specialist - ●  Importer ● Exporter ● Wholesalers

Material Tailored To your specification

ASTM, AMS-QQ-A, AMS, EN, GOST(Russian), IS Standard

In Grade of:-

AA1100, 1200, 2007, 2011, 2014, 2017, 2024, 2124, 3003, 3105, 5005, 5052, 5056, 5083, 5086, 5251, 5754, 6012, 6026, 6060, 6061, 6063, 6082, 6262, 6351, 7020,

7050, 7070, 7075, ALUMAC, ALUMOLD, MIC-6, RDE-40

In Form of:-

● Aluminium Sheets, Plates & Coils ● Aluminium Alloy Extrusions & Drawns ● Aluminium Alloy Forgings●

Please feel free to contact us, so that we can prove our performance. We are confident that we will meet your requirements to your utmost satisfaction. We would appreciate if WELCOME OVERSEAS is enlisted on your record as one of your valued suppliers.  It will be a great pleasure to have an everlasting and fruitful business relationship with you.

• X-Ray Frame Sections
• General Miscellaneous

• Aviations
• Space & Science
• Air Grill & Refrigeration Sections
• Electricals Sections
• Electronics Sections
• Solar Power Sections
• Heat Sink Sections
• Pump Body Sections
• Motor Body Sections
• Industrial Sections
• Elevator Sections
• Conveyor Sections
• Telecommunication
• Textile Machinery
• Suitcase Sections