Shape | Round |
Unit Pipe Length | 6 meter |
Material Grade | SS304 |
Material | Stainless Steel |
Technique | Hot Rolled |
Pipe Fluid | Chemical, Gas, Water |
Surface Finish | Mill Finished |
Diameter | 20-100 mm |
Country of Origin | Made in India |
Table 1. Composition ranges for 304 grade stainless steel
Grade |
C |
Mn |
Si |
P |
|
Cr |
Mo |
Ni |
N |
|
304 |
min. max. |
- 0.08 |
- 2.0 |
- 0.75 |
- 0.045 |
- 0.030 |
18.0 20.0 |
- |
8.0 10.5 |
- 0.10 |
304L |
min. max. |
- 0.030 |
- 2.0 |
- 0.75 |
- 0.045 |
- 0.030 |
18.0 20.0 |
- |
8.0 12.0 |
- 0.10 |
304H |
min. max. |
0.04 0.10 |
- 2.0 |
- 0.75 |
-0.045 |
- 0.030 |
18.0 20.0 |
- |
8.0 10.5 |
- |
Usage/Application | Construction |
Unit Pipe Length | 6 meter |
Material Grade | SS317L |
Thickness | 5 mm |
Color | Silver |
Pipe Fluid | Chemical, Water, Gas |
Material | Stainless Steel |
Surface Finish | Mill Finished |
Hollow Section | Circular |
Diameter | 20-100 mm |
Other:
Stainless Steel SS 317/ 317L | |
---|---|
AISI | 317 / 317L |
UNS | S31700 / S31703 |
Werkstoff Nr. | 1.4449 / 1.4438 |
SS 317 | SS 317L | |
Ni | 11 – 14 | 11 – 15 |
Cr | 18 – 20 | 18 – 20 |
C | 0.08 max | 0.035 max |
Mo | 3 – 4 | 3 – 4 |
Fe | Balance | |
Mn | 2 max | 2 max |
Si | 1 max | 1 max |
S | 0.03 max | 0.03 max |
P | 0.040 max | 0.040 max |
Length | 10 mtr |
Elongation (%) | 40 |
Material Grade | SS347 |
Material | Stainless Steel |
Hollow Sections | Round |
Element | 347 |
Carbon* | 0.08 |
Manganese | 2.00 |
Phosphorus | 0.045 |
Sulfur | 0.03 |
Silicon | 0.75 |
Chromium | 17.00-19.00 |
Nickel | 9.00-13.00 |
Columbium + Tantalum** | 10xC min to 1.00 max |
Tantalum | -- |
Titanium** | -- |
Cobalt | -- |
Nitrogen | -- |
Iron | Balance |
Length | 6-8 meters |
Material | Stainless Steel |
Hollow Sections | Round |
Elongation | 47 |
Grade | C | Mn | Si | P | S | Cr | Mo | Ni | N | |
304 | min. max. | - 0.08 | - 2.0 | - 0.75 | - 0.045 | - 0.030 | 18.0 20.0 | - | 8.0 10.5 | - 0.10 |
304L | min. max. | - 0.030 | - 2.0 | - 0.75 | - 0.045 | - 0.030 | 18.0 20.0 | - | 8.0 12.0 | - 0.10 |
304H | min. max. | 0.04 0.10 | - 2.0 | - 0.75 | -0.045 | - 0.030 | 18.0 20.0 | - | 8.0 10.5 | - |
Grade | Tensile Strength (MPa) min | Yield Strength 0.2% Proof (MPa) min | Elongation (% in 50mm) min | Hardness | |
Rockwell B (HR B) max | Brinell (HB) max | ||||
304 | 515 | 205 | 40 | 92 | 201 |
304L | 485 | 170 | 40 | 92 | 201 |
304H | 515 | 205 | 40 | 92 | 201 |
304H also has a requirement for a grain size of ASTM No 7 or coarser. |
Unit Pipe Length | 9 meter |
Elongation (%) | 63 |
Grade | SS317 |
Material | Stainless Steel |
Steel Grade | SS202 |
Length | 4-6 meters |
Size | 1/2 inch, 3 inch |
Material | Stainless Steel |
Length | 2-4 meters |
Grade | SS317L |
Material | Stainless Steel |
Elongation | 47 |
Grade | SS304 |
Size | 1/2 inch, 2 inch |
Unit Pipe Length | 9 meter |
Material | Stainless Steel |
Grade | C | Mn | Si | P | Cr | Mo | Ni | N | ||
304 | min.max. | -0.08 | -2.0 | -0.75 | -0.045 | -0.030 | 18.020.0 | - | 8.010.5 | -0.10 |
304L | min.max. | -0.030 | -2.0 | -0.75 | -0.045 | -0.030 | 18.020.0 | - | 8.012.0 | -0.10 |
304H | min.max. | 0.040.10 | -2.0 | -0.75 | -0.045 | -0.030 | 18.020.0 | - | 8.010.5 | - |
Unit Pipe Length | 6 meter |
Size | 1/2 inch, 3 inch |
Steel Grade | SS316 |
Material | Stainless Steel |
Length | 4-6 meters |
Elongation (%) | 52 |
Material | Stainless Steel |
Grade | C | Mn | Si | P | S | Cr | Mo | Ni | N | Other | |
321 | min. max | - 0.08 | 2.00 | 0.75 | 0.045 | 0.030 | 17.0 19.0 | - | 9.0 12.0 | 0.10 | Ti=5(C+N) 0.70 |
321H | min. max | 0.04 0.10 | 2.00 | 0.75 | 0.045 | 0.030 | 17.0 19.0 | - | 9.0 12.0 | - | Ti=4(C+N) 0.70 |
347 | min. max | 0.08 | 2.00 | 0.75 | 0.045 | 0.030 | 17.0 19.0 | - | 9.0 13.0 | - | Nb=10(C+N) 1.0 |
Grade | SS316L |
Material | Stainless Steel |
Length | 12.5 mtr |
Grade | C | Mn | Si | P | Cr | Mo | Ni | N | ||
316L | Min | - | - | - | - | - | 16.0 | 2.00 | 10.0 | - |
Max | 0.03 | 2.0 | 0.75 | 0.045 | 0.03 | 18.0 | 3.00 | 14.0 | 0.10 |
Grade | Tensile Str (MPa) min | Yield Str 0.2% Proof (MPa) min | Elong (% in 50mm) min | Hardness | |
Rockwell B (HR B) max | Brinell (HB) max | ||||
316L | 485 | 170 | 40 | 95 | 217 |
Size | 1/8"NB TO 30"NB |
Unit Pipe Length | 6 meter |
Material | Stainless Steel |
Weight % | Cr | Ni | Mn | Si | Mo | C | P | S | Ti |
316 | 16-18 | 11-14 | 2.00 | 0.75 | 2-3 | 0.080 | 0.040 | 0.030 | - |
316L | 16-18 | 10-15 | 2.00 | 0.75 | 2-3 | 0.035 | 0.040 | 0.030 | - |
316Ti | 16.5-18 | 10.5-12 | 1.90 | 0.75 | 2-2.5 | 0.060 | - | - | 0.3 |
Diameter | 10-100 mm |
Shape | Round |
Unit Pipe Length | 6 meter |
Usage/Application | Construction |
Material Grade | SS 304L |
Color | Silver |
Pipe Fluid | Gas, Chemical, Water |
Hollow Section | Circular |
Surface Finish | Mill Finished |
Tensile Strength | 515 MPa |
Technique | Hot Rolled |
Country of Origin | Made in India |
We Welcome Overseas is the stockist , exporter and supplier of Stainless Steel 304LTubes.Precision engineered our range is widely used in various industries such as chemicals dyeing, sugar and other industries across the globe. Specifying all the industrial standards these steel tubes are offered in various forms like round, rectangular, square, coil & U-shape. We also meet customized requirement and offer our range at industry leading prices.
Table 1. Composition ranges for 304 grade stainless steel
Grade | C | Mn | Si | P | S | Cr | Mo | Ni | N | |
304 | min. max. |
- 0.08 |
- 2.0 |
- 0.75 |
- 0.045 |
- 0.030 |
18.0 20.0 |
- | 8.0 10.5 |
- 0.10 |
304L | min. max. |
- 0.030 |
- 2.0 |
- 0.75 |
- 0.045 |
- 0.030 |
18.0 20.0 |
- | 8.0 12.0 |
- 0.10 |
304H | min. max. |
0.04 0.10 |
- 2.0 |
- 0.75 |
-0.045 | - 0.030 |
18.0 20.0 |
- | 8.0 10.5 |
- |
304L Stainless Steel Pipes and Tubes Mechanical Properties Typical mechanical properties for grade 304 stainless steels are given in table 2.
Table 2. Mechanical properties of 304 grade stainless steel
Grade | Tensile Strength (MPa) min | Yield Strength 0.2% Proof (MPa) min | Elongation (% in 50mm) min | Hardness | |
Rockwell B (HR B) max | Brinell (HB) max | ||||
304 | 515 | 205 | 40 | 92 | 201 |
304L | 485 | 170 | 40 | 92 | 201 |
304H | 515 | 205 | 40 | 92 | 201 |
304H also has a requirement for a grain size of ASTM No 7 or coarser. |
Unit Pipe Length | 6 meter |
Usage/Application | Construction |
Material Grade | 316L |
Thickness | 10 mm |
Color | Silver |
Material | Stainless Steel |
Pipe Fluid | Water, Gas, Chemical |
Surface Finish | Mill Finished |
Hollow Section | Circular |
Country of Origin | Made in India |
Grade 316 is the standard molybdenum-bearing grade, second in importance to 304 amongst the austenitic stainless steels. The molybdenum gives 316 better overall corrosion resistant properties than Grade 304, particularly higher resistance to pitting and crevice corrosion in chloride environments. Grade 316L, the low carbon version of 316 and is immune from sensitisation (grain boundary carbide precipitation). Thus it is extensively used in heavy gauge welded components (over about 6mm). There is commonly no appreciable price difference between 316 and 316L stainless steel. The austenitic structure also gives these grades excellent toughness, even down to cryogenic temperatures. Compared to chromium-nickel austenitic stainless steels, 316L stainless steel offers higher creep, stress to rupture and tensile strength at elevated temperatures.
Table 1. Composition ranges for 316L stainless steels.
Grade |
|
C |
Mn |
Si |
P |
|
Cr |
Mo |
Ni |
N |
316L |
Min |
- |
- |
- |
- |
- |
16.0 |
2.00 |
10.0 |
- |
Max |
0.03 |
2.0 |
0.75 |
0.045 |
0.03 |
18.0 |
3.00 |
14.0 |
0.10 |
Table 2. Mechanical properties of 316L stainless steels.
Grade |
Tensile Str |
Yield Str |
Elong |
Hardness |
|
Rockwell B (HR B) max |
Brinell (HB) max |
||||
316L |
485 |
170 |
40 |
95 |
217 |
Thickness | 10 mm |
Shape | Square |
Unit Pipe Length | 6 meter |
Pipe Fluid | Chemical, Gas, Water |
Surface Finish | Mill Finished |
Material | Stainless Steel |
Country of Origin | Made in India |
Thickness | 8 mm |
Diameter | 20-100 mm |
Unit Pipe Length | 6 meter |
Usage/Application | Construction |
Material Grade | SS 202 |
Color | Silver |
Material | Stainless Steel |
Pipe Fluid | Chemical, Water, Gas |
Hollow Section | Circular |
Surface Finish | Mill Finished |
Country of Origin | Made in India |
Thickness | 10 mm |
Diameter | 20-100 mm |
Unit Pipe Length | 6 meter |
Usage/Application | Construction |
Material Grade | SS 316TL |
Color | Silver |
Material | Stainless Steel |
Hollow Section | Circular |
Pipe Fluid | Chemical, Water, Gas |
Surface Finish | Mill Finished |
Country of Origin | Made in India |
Data Sheet: |
Stainless Steel Tube 316 ti |
Chemical Composition Limits |
|||||||||
Weight % |
Cr | Ni | Mn | Si | Mo | C | P |
S |
Ti |
316 |
16-18 | 11-14 | 2.00 | 0.75 | 2-3 | 0.080 | 0.040 |
0.030 |
- |
316L |
16-18 | 10-15 | 2.00 | 0.75 | 2-3 | 0.035 | 0.040 |
0.030 |
- |
316Ti |
16.5-18 | 10.5-12 | 1.90 | 0.75 | 2-2.5 | 0.060 | - |
- |
0.3 |
Diameter | 20-100 mm |
Unit Pipe Length | 6 meter |
Usage/Application | Construction |
Material Grade | SS 317 |
Color | Silver |
Material | Stainless Steel |
Pipe Fluid | Gas, Water, Chemical |
Hollow Section | Circular |
Surface Finish | Mill Finished |
Elongation | 35 % |
Density | 8.0 g/cm3 |
Country of Origin | Made in India |
Other:
Specifications
Stainless Steel SS 317/ 317L | |
---|---|
AISI | 317 / 317L |
UNS | S31700 / S31703 |
Werkstoff Nr. | 1.4449 / 1.4438 |
SS 317 | SS 317L | |
Ni | 11 – 14 | 11 – 15 |
Cr | 18 – 20 | 18 – 20 |
C | 0.08 max | 0.035 max |
Mo | 3 – 4 | 3 – 4 |
Fe | Balance | |
Mn | 2 max | 2 max |
Si | 1 max | 1 max |
S | 0.03 max | 0.03 max |
P | 0.040 max | 0.040 max |
Density | 8.0 g/cm3 |
Melting Point | 1454 °C (2650 °F) |
Tensile Strength | Psi – 75000 , MPa – 515 |
Yield Strength (0.2%Offset) | Psi – 30000 , MPa – 205 |
Elongation | 35 % |
Thickness | 10 mm |
Diameter | 20-100 mm |
Unit Pipe Length | 6 meter |
Usage/Application | Construction |
Material Grade | SS321 |
Color | Silver |
Material | Stainless Steel |
Pipe Fluid | Water, Gas, Chemical |
Hollow Section | Circular |
Surface Finish | Mill Finished |
Country of Origin | Made in India |
Grade | C | Mn | Si | P | S | Cr | Mo | Ni | N | Other | |
321 | min. max |
- 0.08 |
2.00 | 0.75 | 0.045 | 0.030 | 17.0 19.0 |
- | 9.0 12.0 |
0.10 | Ti=5(C+N) 0.70 |
321H | min. max |
0.04 0.10 |
2.00 | 0.75 | 0.045 | 0.030 | 17.0 19.0 |
- | 9.0 12.0 |
- | Ti=4(C+N) 0.70 |
347 | min. max |
0.08 | 2.00 | 0.75 | 0.045 | 0.030 | 17.0 19.0 |
- | 9.0 13.0 |
- | Nb=10(C+N) 1.0 |
Thickness | 5-10 mm |
Unit Pipe Length | 6 meter |
Usage/Application | Construction |
Material Grade | SS316 |
Color | Silver |
Material | Stainless Steel |
Pipe Fluid | Gas, Water, Chemical |
Hollow Section | Circular |
Surface Finish | Mill Finished |
Country of Origin | Made in India |
Specifications:
Minimum Order Quantity | 1000 Kilogram |
Color | Metallic Gray |
Size | Other |
Type | Seamless |
Material | yes |
Shape | yes |
Thickness | yes |
Country of Origin | Made in India |
Shape | Round |
Unit Pipe Length | 6 meter |
Material Grade | SS304 |
Material | ss |
Pipe Fluid | Gas, Chemical, Water |
Type | Welded |
Surface Finishing | Polished |
Minimum Order Quantity | 1000 Kilogram |
location | Mumbai |
Country of Origin | Made in India |
Size | 3 inch, 1/2 inch |
Unit Pipe Length | 6 meter |
Material | Stainless Steel |
Elongation (%) | 59 |
C | Cr | Cu | Mn | Mo | Ni | P | S | Si |
Max | Max | Max | Max | Max | ||||
0.02 | 19.0-23.0 | 1.0-2.0 | 2.0 | 4.0-5.0 | 23.0-28.0 | 0.045 | 0.035 | 1.0 |
Material | Stainless Steel |
Grade | 201, 202, 304, 304H, 304L, 309, 310, 316, 316L, 321, 904,904L etc |
Standard | ASTM A-213, A-249, A-268, A-269, A-270, A-312, A-789, EN10216-5 and EN10217-7 |
TP 304 | TP 316 | TP310 | TP 410 | UNS S 32750 | 1.4404 |
TP 304 H | TP 316 H | TP 317 | TP 430 | 1.4571 | 1.4541 |
TP 304 L | TP 316 L | TP 321 | S 40910 | 1.4306 | - |
TP 309 S | TP 316 Ti | TP 347 | UNS S 31803 | 1.4401 | - |
Material | Stainless Steel |
Usage/Application | Construction |
Thickness | 5 mm |
Surface Finish | Mill Finished |
Unit Pipe Length | 6m |
Shape | Round |
Technique | Hot Rolled |
Country of Origin | Made in India |
We offer a wide range of Stainless Steel Seamless Tubes that have high tensile strength and are highly durable. The tubes are available in various industrial specifications with outer diameter ranging from 3.00 mm to 219.10 mm and thickness of the wall ranging from 0.40 mm to 12.70 mm. Our stainless steel seamless tubes are available in the following specifications
Length:
Conditions:
Standard:
Available Grades:
TP 304 | TP 316 | TP310 | TP 410 | UNS S 32750 | 1.4404 |
TP 304 H | TP 316 H | TP 317 | TP 430 | 1.4571 | 1.4541 |
TP 304 L | TP 316 L | TP 321 | S 40910 | 1.4306 | |
TP 309 S | TP 316 Ti | TP 347 | UNS S 31803 | 1.4401 |
Steel Grade | SS 316 |
Surface Treatment | Hot Rolled |
Shape | Rectangular |
Standard | ASTM |
Country of Origin | Made in India |