Welcome Overseas
Mumbai, Maharashtra
GST No. 27APDPB4339P1ZN
Call 07942823181 86% Response Rate
Copper Pipes and Tubes
Nickel and Copper Alloy Tubes
| Usage/Application | Air Condition |
| Thickness | 5 mm |
| Length | 6-8 meters |
| Material | Nickel and Copper |
| Country of Origin | Made in India |
| Surface Finish | Polished |
Features:
- Highly corrosion resistance
- Available in various sizes
- Affordable price.
View Complete details
Copper Nickel Pipes
| Material | Copper Nickel |
| Single Piece Length | 18 meter |
| Shape | Round |
| Surface Finishing | Polished |
| Technique | Hot Rolled |
| Country of Origin | Made in India |
| Application | Air Condition , Water Heater |
| Classi- fication |
Class | Chemical Composition (%) | Related Standards | |||||||||||||||
| Cu | Zn | Pb | Fe | P | Sn | Ni | Mn | Al | As | Other | ISS | KS | JIS | ASTM | BS | DIN | ||
| Cu-Ni Tube | 1 | rem. | 1.00 max | 0.05 max | 1.3-1.7 | - | - | 4.8-6.2 | 0.3-0.8 | - | - | IS:15 45 CuNi5 Fe |
D 5301 C7040 | CuNi 95+5 7040 |
B 111 C70400 |
2871 CN101 |
1785 CuNi 5Fe |
|
| 2 | rem. | 1.00 max | 0.05 max | 1.0-1.8 | - | - | 9.0-11.0 | 1.0-max | - | - | IS:15 45 CuNi 10Fe1 |
C 7060 | CuNi 90:10 C 7060 |
C 70600 |
CN102 | CuNi 10Fe |
||
Mechanical Properties
| Classi- fication |
Temper | Designation | Cu Alloy UNS No. |
Tensile Test | ||||
| Outside diameter (mm) | Thickness (mm) | Tensile Strength Kgf/mm2 | Elongation (%) | Yield Strength (kg/mm2) | ||||
| Copper Nickel Tube | 061 | Annealed | C70400 | 5-250mm | 0.8-10 | 27(260) | 9(85) | |
| H55 | Light Drawn | C70400 | 5-250mm | 0.8-10 | 28(275) | - | 21(205) | |
| 061 | Annealed | C70600 | 5-250mm | 0.8-10 | 28(275) | - | 11(105) | |
| H55 | Light Drawn | C70600 | 5-250mm | 0.8-10 | 32(310) | - | 25(240) | |
View Complete details
Copper Tube
| Size | 4mm to 25.4mm |
| Thickness | 0.27 mm |
| Material | Copper |
| Country of Origin | Made in India |
| Shape | Round |
| Surface Finish | Polished |
The precision manufactured Copper Tube offered by us find usage in a variety of applications. With minimum copper content of 99.9% as per IS-191, these copper tubes are also resistant to corrosion and feature superior mechanical strength. These tubes have superior mechanical strength and provides for low pressure loss. These are easy in installation, thus helping in achieving improved cost-effectiveness as compared with other metals. The de-oxidized copper is also well suited to welding and brazing.
View Complete details
Copper Pipes
| Unit Length | 12 m |
| Diameter | 20 mm |
| Finishing | Polished |
| Hollow Section | Circular |
| Packaging Type | Roll |
| Material | Copper |
| Country of Origin | Made in India |
| Surface Finish | Polished |
Copper Pipes are made of de-oxidized copper with minimum copper content of 99.9% as per IS-191 that make these suited to welding and brazing applications. Some of the areas where these are preferable used in include sanitary waste water drainage, wet central heating systems, oil services for heating, chilled water and refrigeration, fire sprinkler systems and other areas.
General Properties:
- Size - 12mm to 160mm dia in shape of Round, Hex and Square.
- Thickness - (OD) 4mm to 150mm; thickness minimum - 0.27mm to 12mm
- Weight - Weight per feet in kg
- Standard & Material – ASTM B88
- Finishes (Tempering) - Soft annealed, Light drawn, Drawn, Hard drawn
Application Areas:
- Air conditioner and refrigerator
- Water tube service & distribution
- Handling of Fire Protection, Solar, Fuel/Fuel Oil
- Handling of Natural Gas, Liquefied Petroleum (LP) Gas
- Handling of HVAC, Drain applications
- Handling of Waste, Vent Piping needs
- Re-drawing use
- Heat exchange Use
View Complete details
EXPLORE MORE CATEGORIES